UID22494
威望152
金钱398414
交易诚信度68
主题700
帖子7504
注册时间2001-11-21
最后登录2025-12-15
核心会员
      
 
交易诚信度68
注册时间2001-11-21
|

楼主 |
发表于 2007-11-6 10:23
|
显示全部楼层
| PT-AE2000
| Power supply
| 100–240 V AC, 50/60 Hz
| Power consumption
| 240 W (Approx. 0.08 W in standby mode with fan stopped)
| Amps
| 2.8 A - 1.2 A
| LCD
panel *1
| Panel size
| 0.74 (17.78 mm) diagonal
| Aspect ratio
| 16:9 aspect ratio
| Display method
| Transparent LCD panels (x3 R/G/B)
| Drive method
| Active matrix
| Pixels
| 2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
| Lens
| Powered zoom (2x) / Powered focus, F 1.9 - 3.2, f 22.4 mm - 44.8 mm
| Lamp *2
| 165 W UHM ™ lamp
| Brightness *3
| 1,500 lumens *4
| Contrast *3
| 16,000:1 *4 (full on/full off)
| Center-to-corner uniformity ratio
| 85%
| Colors
| Full color (1,073,741,824 colors)
| Projection size
| 1,016–5,080 mm (40-200 inches) diagonally, 16:9 aspect ratio
| Throw distance
| 1.2 m -12.0 m (3'11"- 39'4")
| Resolution
| 1,920 x 1,080 pixels
| Screen aspect ratio
| 16:9 (4:3 compatible)
| Scanning frequency
| RGB
| fH 30–70 kHz, fV 50– 87 Hz,
Dot clock: Less than 150 MHz
| S-Video/Video
| fH 15.75 kHz fV 60 Hz (NTSC, NTSC4.43, PAL-M, PAL60)
fH 15.63 kHz fV 50 Hz (PAL, PAL-N, SECAM)
| YPBPR signal compatibility
| 480i (525i), 480p (525p), 576i (625i),
576p (625p), 720 (750)/50p,
720 (750)/60p, 1,080 (1,125)/24p,
1,080 (1,125)/50i, 1,080 (1,125)/50p,
1,080 (1,125)/60i, 1,080 (1,125)/60p
| Color system
| NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL 60, SECAM
| Optical axis shift *5
| Horizontal ±40% and vertical ±100%
| Keystone correction range
| Vertical: approx. ±30°
| Installation
| Ceiling/floor, front/rear (menu selection)
| OSD languages
| English, French, German, Spanish,
Italian, Chinese, Korean, Russian,
Swedish, Danish, Norwegian, Polish,
Czech, Hungarian, Portuguese, Thai
| Terminals
| HDMI IN
| Triple - line, 19 - pin HDMI connector
| PC(RGB) IN
| Single - line, D-sub HD 15-pin (female)
R.G.B.: 0.7V [p-p], 75 Ω
G.SYNC: 1.0V [p-p], 75 Ω
HD/SYNC: TTL high impedance, automatic positive/negative
polarity compatible
VD: TTL high impedance, automatic positive/negative polarity
compatible
| COMPONENT IN
| Y, PB/CB, PR/CR: Single - line, RCA pin jack x 3
Y: 1.0V [p-p] (including sync), 75 Ω
PB/CB, PR/CR: 0.7V [p-p], 75 Ω
| S-VIDEO IN
| Single - line, Mini DIN 4p Y: 1.0V [p-p], C: 0.286 V [p-p], 75 Ω
| VIDEO IN
| Single - line, RCA pin jack 1.0V [p-p], 75 Ω
| SERIAL
| D-sub 9-pin x 1 (RS-232C based)
| Power cord length
| 3m (9'10")
| Cabinet material
| ABS/PC
| Dimensions *6 (W x H x D)
| 460 x 130 x 300 mm (18-3/32" x 5-3/32" x 11-25/32")
| Weight
| 7.2 kg (15.9 lbs.)
| Operating environment
| Temperature: 0° - 40°C (32° - 104°F)
Humidity: 20% - 80% (no condensation)
| Remote control unit
| Power supply
| 3 V DC (AA type battery x 2)
| Operation range
| Approx. 7 m (23') when operated from directly in front of the signal receptor
| Dimensions
(W x H x D)
| 52 x 200 x 28.5 mm (2˝ x 6-15/16˝ x 7/8˝)
| Weight
| 170 g (6 oz.) (including batteries)
| Supplied accessories
| Power cord, Wireless remote control unit, Batteries for remote control (AA type x 2)
| Optional accessories
| ET-LAE1000
| Replacement lamp unit
| ET-PKE1000S
| Ceiling mount bracket
| ET-PKE2000
| Ceiling mount bracket for high ceilings
| ET-PCE2000
| Cable cover
|
*1:
| The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technology designed to provide one of the finest possible images. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
| *2:
| The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fails to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
| *3:
| Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
| *4:
| In AI mode, with dynamic iris on.
| *5:
| Shift range is limited during simultaneous horizontal and vertical shifting.
| *6:
| Excluding protrusions
|
[ 本帖最后由 赢家 于 2007-11-6 11:40 编辑 ] |
|