UID127969
威望0
金钱9076
交易诚信度0
主题2
帖子28
注册时间2005-3-13
最后登录2018-3-1
新手上路

交易诚信度0
注册时间2005-3-13
|

楼主 |
发表于 2016-5-6 21:35
|
显示全部楼层
Power requirements Image Multiplexer (VMI-40MD):
DC IN: 24 V 1.5 A (supply from AC adapter)
AC adapter (Sony, AC-110MD)
AC IN: 100 V to 240 V, 50/60 Hz, 0.5 A to 0.3 A
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 20% to 80% (no condensation)
Operating pressure 700 hPa to 1,060 hPa
Temperature range for storage –20 °C to 60 °C (–4 °F to 140 °F)
Humidity range for storage 20% to 90% (no condensation)
Storage and transport pressure 700 hPa to 1,060 hPa
Mass 4 kg (8 lb 13 oz) (main unit only)
Dimensions (w x d x h) 305 × 114 × 322 mm (12 1/8 × 4 1/2 ×12 3/4 in.) (including protrusions)
Input connectors
VIDEO IN BNC (x2) NTSC/PAL, 1.0 Vp-p, 75 Ω, sync negative
DVI IN DVI-D (x1)
RGB IN Mini D-sub 15-pin (x2) 0.7 Vp-p (R, G, B) 0.7 Vp-p (sync)
SDI IN BNC (x2) SDI/HD-SDI, 75 Ω, SD: SMPTE259M/HD: SMPTE292M complient
HDMI IN HDMI-A (x1)
AUDIO LINE IN XLR (x2) : +4 dBm, balanced
Pin jack (x2) : unbalanced
Output connectors
COMPONENT Pin jack(x3) : 1.0 Vp-p (Y) 0.7 Vp-p (B-R, R-Y), 75 Ω, sync negative
VIDEO OUT BNC (x1) : NTSC/PAL, 1.0 Vp-p, 75 Ω, sync negative
SDI OUT BNC (x1) : HD-SDI, 75 Ω
HDMI OUT HDMI-A (x1)
RGB OUT Mini D-sub 15-pin (x2) 0.7 Vp-p (R, G, B) 0.7 Vp-p (sync),
75 Ω, sync negative
AUDIO LINE OUT XLR (x2) : +4 dBm, 600 Ω termination, balanced
Pin jack (x2) : unbalanced
Other interfaces
USB USB Type A (x1) : USB 2.0 for still image capture
USB type B (x1) : USB 2.0 for control
REMOTE RS-232C D-sub 9pin (x1)
REMOTE contact switch Mini jack (x4)
THROUGH connector HDMI IN (x1) to SDI OUT (x1)
Equipotential connector
Supplied accessories
Before Using this Unit (1), CD-ROM (1), AC-110MD AC adapter (1), AC-110MD Operating Instruction |
|